Evotech Performance Evo Brake & Clutch Levers 13-18 BMW R1200 Variants

All EP Evo Clutch & Brake Lever Sets are designed for road, track day and even off-road excursions on ADV bikes – basically any riding situation you would normally ride your road-going motorcycle. With regards to them being safe to use – they are very safe. Each component part has been designed by Evotech Performance engineers to deal with the rigours of an OE clutch and brake lever with added benefit of a pivot system to allow both levers to pivot upwards when they hit a solid object. This reduces the chances of the levers breaking and leaving you stranded.

For more information about Evotech levers, please refer to the features section.

Note: It is your responsibility to review the fitment section to ensure compatibility with your bike.

Features of EP Evo Folding Clutch Lever & Short Brake Lever Set

• Designed by Evotech Performance using state of the art design software – and riding experience
  
• Anatomically correct deep radiused edges along each lever length for comfort, feel and style
  
• Clutch Lever blade pivots upwards upon contact with a solid object to help prevent breakage –manually returns to original position
  
• Clutch Lever held firmly in place by tensioned spring and bearing and cannot accidentally be moved out of position
  
• Brake lever is a non-folding Evo Short (two-finger) Lever
  
• Short Evo Brake Lever features ‘snap-point’ at ball end
  
• Six-position adjustment span via an anodised adjuster on both levers to suit varying finger lengths
  
• Adjustment position shown via machined indents
  17mm typical (+/- 1mm) lever span adjustment range (measured at lever midpoint)
  
• Lever blade and bracket mount union machined from billet aluminium
  
• Stainless steel CNC-machined clevis pins, retaining clips and, where supplied, piston adjustment screw/barrel and tension retaining spring
  
• Scalloped machining to rear of lever reduces weight while retaining strength
  
• CNC-machined bracket mount unions for a precise and fuss-free install of OE components
  
• Lever ball-end dimensions meet statutory requirements
  
• Durable black anodise finish on lever blades and bracket mount unions
  
• Red durable anodise finish on span adjusters
  
• Levers and bracket mount unions feature Evotech Performance brand logos
  

Features of EP Evo Short Clutch & Brake Lever Set

• Designed by Evotech Performance using state of the art design software – and riding experience
  
• Anatomically correct deep radiused edges along each lever length for comfort, feel and style
  
• EP EVO lever blades are shorter than the OE equivalents and commonly referred to as “two-finger levers”
  
• Usable lever width is 55mm approx. to easily accommodate two gloved fingers
  
• The “short-length” style reduces the chances of contact with a solid object and breaking
  
• Safeguard “snap point” positioned at lever ball end
  
• Six-position adjustment span to suit varying finger lengths on both levers via an anodised adjuster
  
• Lever adjustment position shown via machined indents
  17mm typical (+/- 1mm) lever span adjustment range (measured at lever midpoint)
  
• Lever blade and bracket mount union machined from billet aluminium
  
• Stainless steel CNC-machined clevis pins and retaining clips and, where supplied, piston adjustment screw/barrel and tension retaining spring
  
• Scalloped machining on lever rear reduces weight while retaining strength
  
• CNC-machined bracket mount unions ensure a precise and fuss-free install of OE components
  
• Lever ball-end dimensions meet statutory requirements
  
• Durable black anodise finish on lever blades and bracket mount unions
  
• Red durable anodise finish on span adjusters
  
• Levers and bracket mount unions feature Evotech Performance brand logos
  

Features of EP Evo Folding Clutch & Brake Lever Set

• Designed by Evotech Performance using state of the art design software – and riding experience
  
• Anatomically correct deep radiused edges along each lever length for comfort, feel and style
  
• Lever blades pivot upwards upon contact with a solid object to help prevent breakage –manually returns to original position
  
• Lever held firmly in place by tensioned spring and bearing and cannot accidentally be moved out of position
  
• Six-position adjustment span via an anodised adjuster on both levers to suit varying finger lengths
  
• Adjustment position shown via machined indents 17mm typical (+/- 1mm) lever span adjustment range (measured at lever midpoint)
• Lever blade and bracket mount union machined from billet aluminium
  
• Stainless steel CNC-machined clevis pins, retaining clips and, where supplied, piston adjustment screw/barrel and tension retaining spring
  
• Scalloped machining to rear of lever reduces weight while retaining strength
  
• CNC-machined bracket mount unions for a precise and fuss-free install of OE components
  
• Lever ball-end dimensions meet statutory requirements
  
• Durable black anodise finish on lever blades and bracket mount unions
  
• Red durable anodise finish on span adjusters
  
• Levers and bracket mount unions feature Evotech Performance brand logos
  

• BMW R1200RS 15-18
• BMW R1200GS 13-18
• BMW R1200RT 17-18
• BMW R1200R 15-18
• BMW R1200GS ADVENTURE 14-18